Laser Cutting

Laser Cutting

Make sure the line colour and thickness to red and 0.001(if you do not want to use laser cut in FBE Lab things would change since different machine may have different setting).In FBE design Lab they use VLS-desktop lasers VLS 3.50.

Using the laser cut machine to cut the shapes and assemble it

Key:

1.The sheet size should be changed since laser cut machine is suited for 300*600.

2.If you want to cut a 3mm thick plywood board. You should set your thickness in 123d make in 3.2mm or 3.3mm a little bit thicker.